Select 'Tools' icon
to enter the Control Panel
Select the 'Devices' icon
to enter the Devices Area
“Devices” configuration page offers below settings:
Tab 1 (Receipt 1)
Tabs 2-5 (Check 1, Check 2, Check 3 & Check 4)
There are 2 receipt printers you can enable as illustrated above
Template: You can use a list of template setup in the system for you to format you receipt output.
Port: You can set the port the receipt printer is connected to e.g. COM 1 or COM 2.
Port Speed: Set the printer's transmission speed.
Handshaking: Set the printer's flow control mechanism, the system can support XON/XOFF, Hardware or None 3 types.
Device Model: Select Model of printer used, all the epson compatible model can just use “Epson TM88IV”.
Encoding: You can set the encoding desired
Auto Print after payment finalisation: This option is used to set weather a receipt is automatically printed after the transaction is finalised.
System allows you to configure up to 4 check printers 1 to 4.
Template: You can use a list of template setup in the system for you to format you check output.
Port: You can set the port the check printer is connected to e.g. COM 1 or COM 2.
Port Speed: Set the printer's transmission speed. e.g. 9600 or 19200
Handshaking: Set the printer's flow control mechanism, the system can support XON/XOFF, Hardware or None 3 types.
Device Model: Select Model of printer used, all the epson compatible model can just use “Epson TM88IV”.
Encoding: You can set the encoding desired
Auto-print copies: You can set the number of copy the check is print out.
Printing item with no routing groups: If this option is enabled, product groups that has no routing setup will be printed.
Print all items: If this option is enabled, it will print out all products if this check printer is enabled.
Tab 6 (Report / Label)
Tab 7 (VFD)
Configure the Report printer and label printer used in this page.
Port: You can set the port the check printer is connected to e.g. COM 1 or COM 2.
Port Speed: Set the printer's transmission speed. e.g. 9600 or 19200
Handshaking: Set the printer's flow control mechanism, the system can support XON/XOFF, Hardware or None 3 types.
Device Model: Select Model of printer used, all the epson compatible model can just use “Epson TM88IV”.
Encoding: You can set the encoding desired
Paper Width: Paper you used for the report printer
The system allow you to configure up to 2 VFD.
Template: Template setup in the system for you to format the VFD output.
Port: You can set the port the VFD is connected to e.g. COM 1 or COM 2.
Port Speed: Set the transmission speed. e.g. 9600 or 19200
Handshaking: Set the flow control mechanism, the system can support XON/XOFF, Hardware or None 3 types.
Device Model: Select Model of printer used, default is Firich VFD.
Encoding: You can set the encoding desired
Tabs 6&7 (Drawer 1 & Drawer 2)
Tab 8 (Scales)
The system support up to 2 cash drawers connecting to it.
Type:Can be set to use the GPIO, or through Printer
Status-enabled: Option specifically designed for more advanced cash drawer that is aware of it's status. e.g. open or closed.
Pulses to send: the number of open signals the system is to send when drawer need to be opened.
Port: You can set the port the cash drawer is connected to e.g. COM 1 or COM 2.
Port Speed: Set the transmission speed.
Handshaking: Set the flow control mechanism, the system can support XON/XOFF, Hardware or None 3 types.
Device Model: Select Model of cash drawer used.
Open drawer on payment type: You can configure different type of payment method and weather or not if they will trigger the cash drawer open event.
The system support up to two electronic scales 1 and 2:
Port: You can set the port the electronic scale is connected to e.g. COM 1 or COM 2.
Port Speed: Set the transmission speed.
Handshaking: Set the flow control mechanism, the system can support XON/XOFF, Hardware or None 3 types.
Device Model: The electronic scale model, e.g. Mettler Toldeo or Excell AW30
Tare (in scale's unit): Can set to deducted the weight of the container used for weighting.
Multiplier: You can use this setting if you need to multiple the scale reading with certain factor.
Tab 9 (iButton)
The system support unlimited iButtons: