...
- Install and Start the EpsonNet Config tool (can be found online or on a disc received with your printer.)
When the EpsonNet Config is already installed, start it by clicking Start/All Programs/EpsonNet/EpsonNet
Config Vx/EpsonNet Config.- Once the printer is plugged in (power and router via ethernet cable) click on Refresh.
- Select the printer a press Configuration.
- Under TCP/IP subheading Basic select Automatic to enable automatic IP specification.
- Press OK.
- Your Printer will now be configured with an Automatically generated IP Address. (If Status does not change to green press Refresh)
...