Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Version 1 Next »

Considerations

Printer needs to be set to a local IP address (cannot use default/test print IP)

Drivers may need to be installed for some windows POS software.

 

  1. Install and Start the EpsonNet Config tool

  2. When the EpsonNet Config is already installed, start it by clicking Start/All Programs/EpsonNet/EpsonNet
    Config Vx/EpsonNet Config.

  3. Once the printer is plugged in (power and router via ethernet cable) click on Refresh. 
  4. Select the printer a press Configuration.
  5. Under TCP/IP subheading Basic select Automatic to enable automatic IP specification.
  6. Press OK.
  7. Your Printer will now be configured with an Automatically generated IP Address. (If Status does not change to green press Refresh)

 

  • No labels