Configuring a Serial Printer for ViViPOS

Configuring your Serial Printer to the ViViPOS is a simple as 1..2..3

1. Get yourself a Test-Print from your Epson Receipt Printer
2. Navigate to Devices on your ViViPOS
3. Input the required values into the spaces provided.

1. Click here for a Self-Test Print guide.
2. Your VIViPOS Terminal requires 2 values from the Test Print:
   1. Port Speed/Baud Rate &
   2. Handshaking
      
3. Once acquired, navigate to Devices in the Control Panel of your ViViPOS.
   
4. Activate a Receipt Printer by ticking the check box below.
   
5. Populate the previously acquired values gathered from a Test Print (Port Speed & Handshaking)
6. In the example above the Port Speed is 38400 and Handshaking is DTR/DSR
7. Add the values to your ViViPOS terminal and save.
8. To set up the Check Printing you will need to mirror the settings if you are using the same printer alternatively follow Step 1-4 for the second printer.. 
   
9. Select the Printer Product Group if you are using Route Printing (for more information about this process click here.) or tick both the options in the square above to print all items in your menu. 
10. Make sure your Auto Print Copies is set to 1 so you are not printing duplicates.
    
11. Modify/Save your settings and away you go.